More race promoters are including non-traditional classes in their programs and other promoters offer nothing but run-what-ya-brung classes. The nuttier racing is the more spectators eat it up. I mean, what flat track spectator wouldn’t enjoy watching high bar choppers trying to negotiate an 1/8th or ¼ mile track?
One of the classes almost always offered is the “stock” Sportster class. Most customers who are into this are using 883 and 1200 Evos. They order a front wheel conversion kit from me to use on the rear so they can get flat track tires (which only come in 19”) to handle the dirt tracks. Oh they’ll put on DT bars, bolt on some number plates and pull the silencers but that’s about it. Hooliganism is catching on in California, Inner mountain west, Texas and in the East. Photo by Kiley Yee, parts guy at High Desert H-D in Idaho.Add a comment
I think I have a cheap way to introduce fresh air right into fan. I've worried that the holes in the nose will not be able to flow enough cooling air. I found this vent unit at Home Depot with a 4" pipe--about 10 bucks. I believe with a bit of trimming it can be inserted into a DIY 4" hole in the pan and the tube is the right length to reach directly over to the fan. The tube should clear under the exhaust. My vent came in brown but flat black plastic aerosol paint should cure that. When I have it trimmed, painted and installed I'll show photos and tell you how to do it.
We are now fulfilling hood kits orders at the rate of about two to three per week so that part is working.
One of you suggested making a mesh grill for the RXL. I saw a license surround on the back of a car today and figured out how to make the RXL grill. Question, should it be black or bright like stainless? Another question-do you even want one? Would you pay between $50 and $100 for one? Votes please.
Joel at SnoProUSA says he has vintage handlebar loops like the one on my sled. In time you'll be able to find them on my site and order them from Joel.
I talked to Conrad the RXL seat maker. We have come to an unofficial plan. Conrad will continue to make real RXL seats. He will make RXL/Indy seats like mine for the small tanks. (You'll have to mount an auxillary brake light on the bumper because he can't make a mount for the Polaris light for anything close to a reasonable cost.) He is undecided what to do about seats for the big tanks.
To achieve an RXL/Indy seat that looks something like mine with tank blended lines Conrad needs the wood built because he says the base gobbles up as much time as foam shaping and sewing. What I want to do is make a prototype seat base out of plywood and send it to one you guys to make them for us. So who is a wood worker and who would be willing to make bases for hire? My plan is to pay the wood man. Have him ship to Conrad. Then I'd charge customers cost for the bases or have Conrad charge the customer and Conrad would pay me back. However it comes down I want to make it possible for you to get a seat that won't cost a king's ransom. Willing woodworkers--call me at 952-607-6063
We are still prototyping the stirrup.
A couple of days ago I got a black hood set and a blue one. The nose on each suffered some minor cracking because they came out of a reverse draft mold-my fault. Luckily the problem is easily solved and my glass man, Tim, is working on it now.
I dropped the nose and hood on my sled the frantic day before the Waconia meet. I was surprised how well they fit-often horror stories are discovered at this point. I didn't have much time to fiddle with mounting but I do have clues.
Two things will happen now. I'll begin making the graphics and orders will be filled. Oh, that blue hood-that is going to Donny Sayen, my Polaris guru and the guy who will finish building my sled. More when I know it. Enjoy photos.
(No, the hood will not be at Waconia--I have no way to protect the loose parts from getting all scratched up.)
Boy this has been a long road but I think I see daylight.
The Duez ¼ turn hood latch kit is done and the first new style hood for Kevin Sondreal is being made. After we pre-fit his hood to proof our work it is into production we will go.
I have contacted the customers who placed early orders to see how many still want to remain on the list. After they have responded, yea or nay, I will take new orders on a first come basis. The following fellows have indicted a burning desire for hood kits so they will get first nod when they confirm; Allen, Swiller and Losvar. (They haven't seen complete pricing yet)
I suspect production rate in the beginning will be something like one per week. That rate may be condensed when every thing starts flowing. Once I pick up a hood kit from the glass maker, I have to take hood to graphics gal to have kit installed (for those of you who are like me and want no part of trying to install those graphics). Others may want graphics separate in the carton for installation later on-no problem. And I have to literally make the carton (ain't no off-the-shelf carton in creation that will take the hood [48 x 41 x 16"]).
To order just mention what you want from the price list and I will follow up with confirmation.
Thanks a ton.